Dwumadi titiriw a ɛwɔ . Automated welding tracking systems yɛ sɛ ɛbɛdi akyi na asiesie welding a ɛwɔ pipes no mu, na adi welding quality haw a ɛnam adwumayɛfoɔ ka a ɛrekɔ soro ne aniwa brɛ a ɛrekɔ so wɔ manual welding adwumayɛ mu no ho dwuma. Nhyehyɛe no fa anisoadehu mfiridwuma a ɛkɔ anim a ɛyɛ nyansa na ɛka optical ne electromechanical mfiridwuma bom. Mprempren, wonhuu nneɛma a ɛte saa biara wɔ China. Wɔ saa nhyehyɛe yi mu no, welding mfonini a ɛda weld ne tungsten abaa ntam no yɛ nea wɔde aniwa a wɔde gye ade no kyere, na afei wɔde mfiridwuma a wɔde aniwa hu na ebu tungsten poma no ano, na wɔteɛteɛ tungsten poma no gyinabea denam electromechanical mfiri no ntam a wɔhwɛ so no so, sɛnea ɛbɛyɛ a wobetumi adi atirimpɔw a ɛne sɛ wobedi dade nhama a wɔde di dwuma no akyi a wɔde wɔn ho bɛhyɛ mu no ho dwuma.
Adwumayɛ su:
1. Non-contact, biribiara nni hɔ a ɛbɛhyɛ bere tenten.
2. Nneɛma a ɛma wohu ade yiye a ɛkorɔn.
3. Nneɛma a wotumi hu .
4. Gyinapɛn pa, a wɔde embedded system di dwuma, ɛyɛ nea ɛyɛ den na wotumi de ho to so sen PC a egyina control system so.
5. Interface a ɛyɛ mmerɛw sɛ wode bedi dwuma.
Welding nhyehyɛe a wɔde afiri yɛ no wɔ mfaso atitiriw anan: welding a ɛyɛ papa, nneɛma a wɔyɛ no kɔ soro, nneɛma a wɔsɛe no a ɛso tew ne adwumayɛfo ho ka a ɛsakra.
A automated welding tracking nhyehyɛe a ɛyɛ pɛpɛɛpɛ a ɛkorɔn no ma torch no kɔ so yɛ adwuma yiye, na ɛma wotumi yɛ ade yiye na ɛyɛ adwuma yiye wɔ welding dwumadi ahorow mu, ɛmfa ho sɛnea seam sesa no. Automatic welding tracking nhyehyɛe no kɔ so te nsakrae ketewaa bi a ɛwɔ weld no mu no ase na ɛteɛteɛ torch no gyinabea ankasa. Welding betumi anya nkɛntɛnso wɔ honam fam warping, weld wrong edge ne welding mfomso afoforo.
Anyɛ yiye koraa no, nhyehyɛe ahorow a ɛyɛ adwuma fã bi no yɛ ntɛmntɛm sen welders a wɔn ho akokwaw no mmɔho abien. Hokwan a wɔhwere ho ka nso yɛ kɛse. Sɛ welders a wɔn ho akokwaw nni hɔ a, adwumakuw no ka a ɛsakra no kɔ soro. Bere pii a wɔyɛ no yera. Nea ɛne eyi bɔ abira no, wɔn a wɔyɛ mfiri a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so no yɛ mmerɛw na ne bo nyɛ den sɛ wobenya sen adwumayɛfo a wɔn ho akokwaw. Automatic welding ma nnipa mfomso a ebetumi aba no so tew. Wɔyɛ welding bere a wɔadi ahwehwɛde ahorow no nyinaa ho dwuma nkutoo. Sɛ wɔde nsa hyɛ mu a, mpɛn pii no, scrap welding kɔ soro bere a welder no brɛ no. Sɛ wogyina sɛnea afã horow no som bo bere a wodu welding station no so a, sika a wɔkora so wɔ scrap costs nkutoo mu no fata sɛ wɔtɔ welding nhyehyɛe a wɔde afiri yɛ no. Ɛsɛ sɛ wosusuw automation nso ho bere a ɛsɛ sɛ adwumayɛbea bi yɛ ketewaa bi na ama wɔatumi de ade a ɛnyɛ papa akɔma adetɔfo bi no.
