Welded pipe internal leveling equipment-a harsatna awm fo leh chinfel dan tur .

Stainless steel sanitary fluid pipe siam dawnin internal weld treatment hi thil pawimawh tak a ni. i mamawh ang a . A chhunga weld leveling machine . Thil siamchhuahnaah chuan nitin hmanrua enkawl hi a pawimawh hle. A châng chuan, glitches ṭhenkhat kan tawn hian, a hnuaia tips hmang hian mahni inhriatthiamna kan kalpui hmasa thei a ni. Vawiin, Hangao Tech (Seko Machinery) hian overview nei turin a rawn hruai che a ni.

1. Thil awmdan 1: Automatic mode-ah chuan trolley chu a inthlak danglam lo; Mahse manual mode ah chuan a kal thei tho.

Harsatna chinfel dan tur chu hetiang hi a ni:

1) Remote signal chu PLC x0-ah thawn a nih leh nih loh enfiah;

2) Cylinder frame-a magnetic switch chu a eng em tih enfiah tur a ni;

3) Hma lam leh hnunglam reversing atana proximity switch te hi a dik lo em tih enfiah thin ang che.

Chhan:

1) Signal a awm lo va, remote connection pawh a inzawm lo;

2) Mandrel cylinder frame-a magnetic switch: magnetic switch awmna hmun chu a inthlak ṭha lo va, a nih loh leh magnetic switch a chhiat phah a

3) Proximity switch a eng lo a nih chuan, emaw, a ruala a eng lo emaw a nih chuan proximity switch a chhia tihna a ni.

Chhanna dik:

1) Remote atanga inzawm leh tur;

2) magnetic switch awmna tur chu siamrem;

3) Proximity switch chu a tharin thlak leh tur a ni.

2. Thil awmdan 2: Manual mode-ah chuan trolley chu horizontal-in a kal lo; Automatic mode-ah pawh a che lo bawk.

Harsatna chinfel dan tur chu hetiang hi a ni:

1) Trolley chu a kal thei a nih chuan hydraulic proportional valve-ah harsatna a awm tih a finfiah a, chu chu block theih a ni a, spring pawh a chhe thei a

2) Proportional valve amplifier board a thlak hnuah car chu a kal thei a, a nih loh leh current tehna chu 0.3-1.1a vel a nih chuan proportional valve amplifier board-ah harsatna a awm tih hriat theih a ni ang

3) Reversing atana proximity switch-ah harsatna a awm a;

4) Voltage a hriat theih loh chuan potentiometer a chhia tih a finfiah a, a nih loh leh potentiometer a chhe tih a finfiah bawk;

5) Signal output awm mahse relay a pull in loh chuan intermediate relay a chhia tihna a ni.

Chhanna dik:

1) Proportional valve chu tifai la, spring chu thlak la, a nih loh leh proportional valve thar hmangin thlak leh rawh;

2) proportional valve amplifier board chu a tharin thlak leh;

3) Proximity switch chu thlak leh tur;

4) Potentiometer chu thlak leh la, a nih loh leh potentiometer connection circuit enfiah la;

5) Intermediate relay chu thlak leh rawh.

3. Thil awmdan 3: Trolley hnuaia roller chu a che lo .

1) Manual mode-ah a thawk thei a, mahse automatic mode-ah erawh a thawk thei lo: Middle proximity switch awmna hmun chu a laiah a awm leh awm loh enfiah rawh. Forward lutuk a nih chuan car chu a tlak hmain a sang tan ang. A hnufual lutuk chuan trolley chu a hun takah a tho thei dawn lo;

2) Manual mode-ah chuan manual chu a kal thei a, mahse automatic chuan a thawk thei lo: (a) Trolley-in a press down solenoid valve light chu a on reng em tih enfiah la, a laiah proximity switch a khawih hnuah a chhuak lo. (b) down-pressing solenoid valve chu a on em tih leh a laiah proximity switch chu a on reng em tih en rawh;

(3) Regulating valve speed chu a dik em tih leh, pressure regulating valve pressure chu a dik em tih enfiah tur

(4) A san emaw a tlak emaw a nih chuan a inmil solenoid valve light chu a eng em tih en rawh. On a nih loh chuan non-contact relay-a light rising leh falling te chu PLC signals rising leh falling nen a inmil em tih enfiah la

(5) Manual mode-a i inthlak hnuah, valve-a thimble chu screwdriver hmangin poke la, roller chu a sang ang a, a tla ang em tih en rawh.

Harsatna chinfel dan tur chu hetiang hi a ni:

(1) middle proximity switch awmna hmun leh a tawp pahnih inkar hlat zawng chu a inhnaih lutuk a;

(2) (a) A laiah proximity switch a chhe a, chu chuan signal input sang lo a siam a; (b) Proximity switch chu short-circuit a nih avangin signal input sang zel a awm a;

(3) Oil valve chu a siam tha tawk lo;

(4) (a) PLC hian output a nei a mahse non-contact relay chuan chhanna a nei lo a, hei hian non-contact relay chu a chhe a, output a nei lo tih a tilang. (b) Non-contact relay-in output a neih laiin valve light a on loh chuan connection line chu a lo chhuak a;

(5) Trolley a kal loh chuan hydraulic valve chu a block tihna a ni a, a nih loh leh spring a chhe tihna a ni.

Chhanna dik:

(1) Proximity switch awmna hmun chu a laiah siamrem rawh;

(2) a laiah proximity switch chu thlak leh tur a ni;

(3) hydraulic valve chung lam leh hnuai lam hawia tlan chakna leh pressure tihsan;

(4) (a) non-contact relay chu thlak leh la (b) Connection circuit a chhiatna hmun enfiah la, a inzawm leh rawh;

(5) Oil valve chu tifai la, spring chu thlak la, a nih loh leh valve chu direct-in thlak leh rawh.